Language

PRODUCT CENTER

PRODUCTS

Hot Rolled A106 GrB Seamless Steel Pipe

Category:

PRODUCT

Steel Tube

Brief description:

Key words:

seamless steel pipe

Hot Rolled A106 GrB

Product Description

ASTM 106

ASTM A106 seamless pressure pipe (also known as ASME SA106 pipe) is commonly used in the construction of oil and gas refineries, power plants, petrochemical plants, boilers, and ships where the piping must transport fluids and gases that exhibit higher temperatures and pressure levels.ASTM A106 pipe includes three grades, A106 GrA , A106 GrB, and A106 GrC.

ASTM A106 Chemical composition:

Steel Grade	C, max.%	Mn %	P, max	S, max	Si, min	Cr, max	Cu, max	Mo, max	Ni, max	V, max
Grade A	0.25	0.27 - 0.93	0.035	0.035	0.10	0.40	0.40	0.15	0.40	0.08
Grade B	0.30	0.29 - 1.06	0.035	0.035	0.10	0.40	0.40	0.15	0.40	0.08
Grade C	0.35	0.29 - 1.06	0.035	0.035	0.10	0.40	0.40	0.15	0.40	0.08

ASTM A106 Mechanical Property:

Grade	Tenssile Test MPa or N/mm2		Remarks (Similar to JIS)
Grade	MIn. Yield Point	Tensile Strength	Remarks (Similar to JIS)
Gr A	205	330Min	(STPG370)
Gr B	240	415Min	(STPG410)
Gr C	275	485Min	(STPG480)

ASTM A106 Seamless Pressure Pipe (also known as ASME SA106 pipe) covers seamless carbon steel nominal wall pipe for high-temperature service. Suitable for bending, flanging and similar forming operations.

Process

Killed steel, with primary melting process being open-hearth, basic-oxygen, or electric-furnace, possibly combined with separate degassing or refining.

Steel cast in ingots or strand cast is permissible.

Hot-finished pipe need not be heat treated.

Cold-drawn pipe shall be heat treated after the final cold draw pass.

General Information

Orders for material under this specification should include the following, as required, to describe the desired material adequately:

Quantity	Meters, centimeters, or number of lengths
Name of material	Seamless
Grade	Grade A, Grade B, or Grade C
Manufacture	Hot-finished or cold-drawn
Size	NPS or Outside Diameter and Schedule Number of Average Wall Thickness
Special outside diameter tolerance pipe
Inside diameter tolerance pipe, over 10 in ID
Length	Specific or random
Supplementary requirements